Why is One Airpod Louder Than The Other? 8 Best Ways to Fix it!

Even though AirPods have been available for almost five years, other organizations continue to highlight their accomplishment. Naturally, we must also talk about how easily a set of AirPods syncs with your iPhone, iPad, and Mac.

These arguments are sound, and they apply to Apple AirPods when they function properly. Occasionally, they don’t. In this instance, one of the AirPods will occasionally be louder than the other. As you would imagine, this can impair your listening, especially if you’re listening to music. But the mistake is elsewhere. Unsurprisingly, one Airpod is louder than the other.

Regardless matter how you look at it, the fact that one AirPod is louder than the other is an annoying problem. But no, you don’t need to bring the AirPods to an Apple Service Center for it. If one AirPod is louder than the other, there are a few effective fixes. To assist you, we have selected the top techniques for “Why is one airpod louder than the other?” in this article.

Related Article: How To Rename AirPods on iPhone, Android, Mac & Windows?

8 Ways to Fix “Why is one airpod louder than the other?”

Following are some of the methods you can try to fix one airpod louder than other. Let’s discuss each in detail.

1.  Clean Your AirPods First

The first factor to consider is wearing and tear, which is frequently the cause of one of your AirPods seeming quieter than the other. Your AirPods and AirPods Charging Case will accumulate a lot of dirt, moisture, and particles over time. All of these materials have the potential to reduce sound quality by obstructing the speaker’s sound output. Cleaning your AirPods and AirPods case with safer techniques makes sense.

You need the following supplies to safely clean your AirPods and AirPods charging case:

  • a non-linting cloth
  • a gentle brush

First, you can clean the surface of the AirPods and the AirPods charging case with a lint-free cloth. Be careful not to cause any lint to adhere to the surface. Doing so can make matters worse. After completing that, take a soft toothbrush and clean the AirPods’ speaker side. Make careful to repeat it gently but often. Repeat the procedure as necessary to thoroughly clean the speaker grills on your AirPods.

2. Check Audio Balance

The Audio Balance feature controls how much sound emanates from each AirPod. One AirPod will be louder than the other if the balance is off. Because of this, you must make sure the Sound Balance is not set to Right or Left.

You can manage this function on your iPhone by:

  1. Select Accessibility under Settings. Check Audio Balance
  2. A menu will appear; select “Audio/Visual.Check Audio Balance
  3. Now, move the slider to the centre by dragging it there. Check Audio Balance

The best aspect is that you can immediately tell the difference. Therefore, make sure that something is playing in the background. You can hear a difference in each AirPod’s level of noise when you move the slider from one setting to the next.

You can consider additional solutions if this step does not resolve the problem.

3. Shut down your iPhone

This method may appear strange at first, but it aids in solving the one AirPod is louder than the other problem. Restarting your iPhone or iPad will solve any iOS software issues that are causing the problem. The AirPods will be immediately disconnected from your iPhone or iPad when you restart it. The wireless earphones will reconnect when you restart your iPhone.

No matter the model, you may use the instructions below to switch off an iPhone.

  1. Choose General from Settings. Shut down your iPhone
  2. When you reach the “Shut Down” option, scroll down. Shut down your iPhone
  3. You must slide the slider to the right on the resulting screen. Shut down your iPhone
  4. You can hold down the Power Button for a few seconds to power on your iPhone.

See if the issue is still present. If so, you can try the next strategy.

4. Reset Your AirPods

Did you realize that you could restore the factory settings on your AirPods? So doing will enable you to restore AirPods to their original state. Naturally, the procedure will erase all data from the device, and you will have to pair it with your iPhone or iPad once more. The following instructions must be followed to reset the AirPods.

  1. Look on the back of your AirPods case for the Reset Button.
  2. Press and hold the button until an amber light starts to flash. It won’t take long for the light to turn white.
  3. The AirPods will display the white flashing color in a short while.
  4. It indicates that your AirPods have been successfully reset.

You may now bring your iPhone or iPad closer to your AirPods to connect them. From iOS, you can view the quick-connect UI. A complete reset of the AirPods should fix the problem if software problems were to blame for the one AirPod is louder than the other mistake. You can use the same approach to address a wide range of other AirPods-related problems.

5. Re-calibrate your AirPods

A practical solution to the problem we’re referring to is to calibrate your AirPods. The calibration procedure only takes a minute or two, which is the nicest part. A recalibration procedure will be helpful if your AirPods have started producing a particular sound frequency as a result of software glitches. You can take the following procedures to calibrate the device.

  1. Connect your AirPods to your iPhone and start a background song.
  2. Use the volume controls to now lower the volume to the smallest level.
  3. In this step, you must go to Settings and disable Bluetooth; do not, however, take out your AirPods. Why is one airpod louder than the other
  4. Switch the music to your iPhone speakers at this point. The volume can then be lowered to its lowest setting.
  5. You can now activate Bluetooth and re-connect your AirPods to your iPhone at this point.

6. Test out your AirPods on a different device

If you consistently tried all the aforementioned techniques without success, you’ll need to determine whether your AirPods are defective in some way. Some have advised connecting your AirPods to one of your other devices, such be your PC, Mac, iPad, iPhone, etc., to determine whether your AirPods are truly defective.

Play a song or a video once you’re connected to hear how good the AirPods sound. If the AirPods function properly on the other device, your primary device might need to have its settings reset.

To reset the settings on your iPhone or iPad, follow these steps:

  1. Go to the Settings app, then select General.
  2. Select Reset next. Test out your AirPods on a different device
  3. Select Reset All Settings to finish. Test out your AirPods on a different device

Your network settings/Wi-Fi passwords, the keyboard dictionary, the Home screen layout, location settings, privacy settings, and Apple Pay cards are all deleted or reset to their default values, as stated by Apple. Your data and media are not erased in any way.

Try trying your AirPods once the reset is finished to determine whether they are functional once more.

7. Update iPhone Software

The software on iPhones is continuously being upgraded, enhanced, and corrected.

One AirPod may sound louder than the other if you’re using outdated or old software, which could be the root of the problem with your AirPod’s Bluetooth connection.

When you can, try to upgrade your phone as frequently as possible. We advise you to enable Automatic Updates so that your phone will schedule these updates during the hours that you are sleeping at night. Update iPhone softwareUpdate iPhone software

8. Turn off Automatic Ear Detection

To determine if that is the problem, We would simply switch off Automatic Ear Detection. Remember that once you disable this, your AirPods will continue to play even when you remove them from your ears.

The following is how to disable automatic ear detection:

  1. Access Settings
  2. choose Bluetooth next.
  3. Next to your AirPods, tap the Info button.
  4. Turn off automatic ear detection by navigating to the bottom.


Why is my one airpod louder than the other?

There can be many reasons for that. Try cleaning your AirPods first. Check The Audio Balance on Your iPhone as well. Try restarting your iPhone.


We hope this article helped you in fixing “why is one airpod louder than the other?“. Let us know in the comment sections below if you found this post useful.

Hira Hafeez

Hira Hafeez is an SEO content writer with 4+ years of experience. A keen learner and always striving to provide content that enhances the overall reading experience. Efficient in writing tech-savvy content that quickly grasp the attention of readers and of course, google.

Related Articles

Back to top button