iOSSmartPhones

Liquid Detected in Lightning Connector – 8 Ways to Fix it!

Don’t freak out if you try to charge your iPhone and the message “Liquid Detected in Lightning Connector” appears. This warning is given frequently.

Your phone’s charging connector is moist, as evidenced by the iPhone notice “Liquid Detected in Lightning Connector.” You can still use your phone, but until the port gets completely dry, you won’t be able to charge it using a lightning cable. However, while you wait, you can use a cordless charger!

In this article, we will tell you 8 ways to fix the “Liquid detected in lightning connector” error message. Let’s get started.

Don’t miss: Last Line No Longer Available iPhone – 10 Ways To Fix It!

What does “Liquid detected in lightning connector” means?

Your phone can recognize liquid in your Lightning port if you have an iPhone XS or later. The error message “Liquid has been detected in the Lightning connector” may appear on your iPhone when this occurs and reads “Charging Not Available.”

Remove your iPhone from its charger and put it outside to dry for a few hours if you see this message. Avoid inserting anything, like headphones or another charger, into your iPhone’s Lightning connector until it dries out. The liquid in the Lightning port may irreversibly harm the internal components of your iPhone.

There are numerous ways for this to occur, however, the following are some of the most typical ones:

Bath or Shower

The humidity in the bathroom might rise quite a bit while you’re taking a shower, accumulating moisture within your iPhone’s charging port.

Rain

Your phone may become wet if you are stuck outside during a downpour or even just a sprinkle.

Pool

Your phone will undoubtedly get wet if you leap into the pool while carrying it in your pocket!

Spilt beverage

Another certain way to get your iPhone wet is to spill coffee or water on it.

8 Ways to Fix “Liquid detected in lightning connector”

“What to do if liquid is detected in lightning connector?” Well, you don’t need to worry because we’ve got some amazing fixes that can help solve your “Liquid detected in lightning connector” problem.

1. Dry the connector of your device

After receiving the “Liquid detected in lightning connector” warning, try drying the connector as your initial course of action. Put that where the charging ports point downward after unplugging it from the charger. In any case, avoid shaking the iPhone since this could cause the water inside to spread.

2. Dismiss the alert

If you are certain that you completely dried the iPhone, the warning may just be the result of a bug. You can then choose to ignore the alert in this situation. There will be a Dismiss option when you receive the warning. Just click or tap that. Note that it can make it impossible for the device to charge. Liquid Detected In Lightning Connector hacktoday

3. Use the Emergency Override

Only use this option in an emergency if you’re ready to take the chance of damaging your iPhone by charging it. As you are aware, combining water and electricity can be fatal. Therefore, it is risky to use this option and charge the iPhone when it contains water. Still, you can try using Emergency override and see if your iPhone works. Liquid Detected In Lightning Connector hacktoday

4. Restart your device

Last but not least, you need to restart your device and try charging again if the iOS liquid-detection notice is still stopping your iPhone from charging even after selecting the Emergency Override option. Long press the side power button and volume up button to restart your iPhone. Restart-your-device-hacktoday

Be patient until the iPhone restarts after unplugging the charger and using the force restart combination. Reconnect the charger and wish yourself luck.

5. Wait for your iPhone to dry

You must always wait and let your iPhone dry naturally if you are not in a hurry. To do this, you must first turn off your iPhone and then maintain the charging port’s downward position to allow gravity to act on the water droplets. To move the water inside the iPhone, you can also give it a little tap. With a piece of cloth, wipe the water that is dripping.

6. Instead, use wireless charging

Another option is to attempt wirelessly charging your iPhone. However, as only the iPhone 8 and later models enable wireless charging, you can only do this if you have one of those models. Since you can charge without a cable, this is a secure choice.

7. Use an Apple charger

Users that charge their iPhone or iPad with aftermarket chargers are the ones who report the Liquid Detected in Lightning Connector error the most.

This could be an attempt by Apple to get customers to only use Apple products. So, try using the original apple charger to dismiss this error.

8. Reset every setting

Finally, you can try to reset the settings on your iPhone. If you want to reset your network settings, follow these steps.

  1. Go to Settings and select General.
  2. Then select Transfer Or Reset iPhone, followed by Reset. reset-iphone-hacktodayReset-your-device-hacktoday

When you select Reset All Settings, your iPhone’s network settings, the Home Screen layout, your location settings, the Keyboard dictionary, and Apple Pay cards will all be reset to their factory defaults. No data or media are erased, though!

Everything is deleted or set to default, including network settings, the keyboard dictionary, the layout of the Home Screen, location settings, privacy settings, and Apple Pay cards. No information or media is removed.

FAQs

How to get water out of charging port?

You must first turn off your iPhone and then maintain the charging port’s downward position to allow gravity to act on the water droplets. To move the water inside the iPhone, you can also give it a little tap. With a piece of cloth, wipe the water that is dripping.

What to do if liquid is detected in lightning connector?

Try drying the connector of your device first properly. Wait for it to be completely dry and then restart your device to check if your iPhone is working. You can also use a wireless charger.

Conclusion

We hope this article helped you in fixing the “Liquid detected in lightning connector” error message. Do let us know in the comment sections if these methods work for you. Good Luck and be safe!

Hira Hafeez

Hira Hafeez is an SEO content writer with 4+ years of experience. A keen learner and always striving to provide content that enhances the overall reading experience. Efficient in writing tech-savvy content that quickly grasp the attention of readers and of course, google.

Related Articles

Back to top button