How To'sWindows

How To Boot Windows 10 Easily In SAFE MODE

It was more like a doddle to launch Windows 7 in Safe Mode. To interrupt the boot operation, you just have to click Shift+8. But it isn’t that simple and clear to boot Windows 10 in Safe Mode.

Some people believe that Windows 10, Safe Mode is not feasible. There are a few options to do this. If you’re a Windows 10 consumer trying to find a certain mechanism, then relax and wait because we’ll signpost you through everything.

What Is Windows Safe Mode?

Under Safe Mode, there are only the applications and functionality that are vital to operating the Windows system. And is used to fix every computer problem. That’s why people call Secure Mode Diagnostic Mode as well.

Often when there is a problem with the windows, a Computer runs instantaneously in Safe Mode. And if not, you can boot Windows on your own in Safe Mode.

Windows 10 Boot Methods In Safe Mode:

1. Start Menu

The first such way of securely booting Windows 10 is via the Start menu. Follow the following steps:

  • – Press and hold the SHIFT key on your keyboard, then select the Restart button in Start menu option.

  • – Now, after restarting the PC, select the troubleshoot option.

  • – You need to press on the Advanced Settings after that.

  • – Select the Startup Settings button below. (Keep in mind: If you are unable to locate the Startup Settings, you can find it after you select See below for more recovery options.)

  • – Eventually, by clicking Restart at the display’s bottom right corner.

  • – Then you’re going to see three options for Safe Mode.

Enable Safe Mode:

This is used with the lowest possible number of drivers to start Windows 10 safe mode. This mode can be initiated by pressing on the keyboard the 4 or the F4 key.

Enable safe networking mode:

If you want all the network drivers to work when Windows restarts, this option should be selected. To use this option, press the 5 or F5 key on the keyboard.

Activate protected mode with the prompt command:

When you have better computer command skills, this choice will function well. But if you don’t have good command on it stay away from the above option as the operating system starts in Text Mode using this option. Use the 6 or F6 key to move this option forward.

You will now see that in the Safe Mode the Windows has rebooted.

2. Lock Screen

If the first option has not operated for you, then with the lock screen you can use the same approach. All measures are like that, and you need to use the lock screen instead of the start menu to get to the Restart option.

  • – Use the Windows+L key combination to lock the computer.
  • – Now, simply press and hold the SHIFT key on your keyboard and use the power button to pick the Restart method.

  • – Afterwards, you must follow the same steps you followed in the very first method, i.e. Troubleshoot > Advanced Options > Reboot. (Keep in mind: ‘ See other troubleshooting tools ‘ if you haven’t found it first, you can get to the Startup Settings.)
  • – Eventually, when the system restarts, you can choose the appropriate Safe Mode option to use the relevant keys.

3. System Configuration Tool (MSConfig)

System configuration tool allows you to have a lot of stuff, one of them is to safely boot Windows 10.

  • – You may access the application in the Start Menu by typing “System Configuration”
    (Note: You can even use the Windows+R key combo to access the tool by using the Run command. Type MSConfig in the Run box and hit OK. The System Configuration tool is now right in front of you.)

  • – You need to open the Boot tab in the app. You must test the Secure Boot option there and select OK.
  • – To reflect the changes, you will then be requested to restart the system. You can restart immediately or reboot later by selecting the Exit option without rebooting. (Also, if you don’t want to lose it, be sure to save any critical data you are working on before you restart.)

4. Settings App

Through accessing the Windows 10 Settings app, you will adopt the last approach we will be discussing.

  • – Search for the keyword ‘ Settings ‘ in the search field from the taskbar to start the app. Alternatively, to start the Settings app straight away, you can use the Windows+I key combination.
  • – Access section Update & Protection.
  • – Now, click the Recovery option on the left side of the device screen and click the Restart option in the Advanced Start area.

The whole process from now on will be exactly the same as what it was with the first two processes.

How do you use Windows 10 to exit safe mode?

Here, all you need to do is shut down or restart your system to exit Safe Mode.

If you’ve used the System Configuration tool to run safe mode, however, you need to go back to the older settings to exit the mode.

In the System Configuration tool, you need to go back to the boot tab and uncheck the Secure Boot feature. The next time you restart it, the system will now operate in normal mode.

Related Articles

Back to top button